mgTriggerGate is a sequenced gate, similar to the trancegate effect found in reFX' Vanguard. It has a little 16-step-sequencer for trigger impulses, is syncable to host tempo and all important parameters are automatable.

Features:

* Sampling Rate: 44.1k, 48k, 88.2k, 96k support.
* 32bit float internal precision.
* Threshold (-60dB to 0dB): Set the threshold level of the gate.
* Attack (0.05ms to 100ms): Set the attack time of the gate.
* Hold (0ms to 1000ms): Set the hold time of the gate.
* Release (ShortRel to 2000ms): Set the release time of the gate.
* Expand Ratio (1:1 to 30:1): Set the ratio of the expander. If you want to use this as only gate effect, set "1:1".
* Range (-oodB to 0dB): Set the minimum level when the gate closes.
* KeyListen (ON or OFF): Output the trigger signals.
* LPF Cutoff Freq (20Hz to off): Set the cutoff frequency of a low pass filter for the trigger signals.
* HPF Cutoff Freq (off to 20000Hz): Set the cutoff frequency of a high pass filter for the trigger signals.
* Input channels were assigned...