Buffer Override can overcome your host app's audio processing buffer size and then (unsuccessfully) override that new buffer size to be a smaller buffer size. It makes a lot more sense if you just try it out and hear what it does. It can sound like a stuttery vocoder or a stuck beat shuffler or many other delightful things. In certain hosts, you can also "play" Buffer Override via MIDI notes and even sync it to song tempo.

Buffer Override can overcome your host app's audio processing buffer size and then (unsuccessfully) override that new buffer size to be a smaller buffer size. It makes a lot more sense if you just try it out and hear what it does. It can sound like a stuttery vocoder or a stuck beat shuffler or many other delightful things. In certain hosts, you can also "play" Buffer Override via MIDI notes and even sync it to song tempo.

mgTriggerGate is a sequenced gate, similar to the trancegate effect found in reFX' Vanguard. It has a little 16-step-sequencer for trigger impulses, is syncable to host tempo and all important parameters are automatable.

Features:

* Sampling Rate: 44.1k, 48k, 88.2k, 96k support.
* 32bit float internal precision.
* Threshold (-60dB to 0dB): Set the threshold level of the gate.
* Attack (0.05ms to 100ms): Set the attack time of the gate.
* Hold (0ms to 1000ms): Set the hold time of the gate.
* Release (ShortRel to 2000ms): Set the release time of the gate.
* Expand Ratio (1:1 to 30:1): Set the ratio of the expander. If you want to use this as only gate effect, set "1:1".
* Range (-oodB to 0dB): Set the minimum level when the gate closes.
* KeyListen (ON or OFF): Output the trigger signals.
* LPF Cutoff Freq (20Hz to off): Set the cutoff frequency of a low pass filter for the trigger signals.
* HPF Cutoff Freq (off to 20000Hz): Set the cutoff frequency of a high pass filter for the trigger signals.
* Input channels were assigned...

KTGranulator is a free delay line granulator available as a VST effect plugin with custom editor and as a MacOSX Audio Unit. It was made as an exploration in building VST effect plugins and using the VSTGUI library and was inspired by the great DLGranulator effect in Ross Bencina's AudioMulch.

It works like this: incoming (mono) sound is fed into a delay line from which small pieces of various durations and at different moments in the past are selected. Each of these pieces is then amplified, transposed and enveloped to form a "grain". Each grain is also randomly panned and the whole mix is sent out to a stereo output stream. Feedback of the grain output back into the delay line is also provided, and the delay line can also be frozen so that the grains are only taken from what is currently stored in the delay line.

01X Channel Module is a VST plugin that is shipped with the Yamaha 01X Production Studio console. The 01X Channel Module is a VST/Audio Units software plug-in version of a single 01X channel strip, giving you the ability to control and manage all mixer parameters, including EQ, dynamics, phase, attenuation and more from an intuitive graphical interface on your computer screen.

The Nokia Auralisation Tool is part of the Nokia Audio Suite. Nokia Audio Suite 1.1 is a tool for creating SP-MIDI audio content (e.g., polyphonic ring tones for Nokia devices). The tool also auralizes (or models) the audio content as it sounds when played through the mobile device's speaker (performance will vary on different PC speakers). Nokia Audio Suite 1.1 allows users to configure the behavior of device lights associated with MIDI ring tones to support the MIDI lights feature. MIDI files that include Lights Configurations can affect gel grips, display lights and keypad Lights on target devices.

More

If bass is important in your music, you need to be sure it's focused and tight. Monofilter gives you control over the stereo width in those all important frequencies.

Monofilter is specifically designed to ensure that sounds are suitable for mastering to vinyl and keeping a check on LF signals in general, especially where stereo effects processing has been applied. Can also be used in live Laptop applications to make sure you get the tightest bass.

More

Synthesizes a mono signal into stereo, using comb filtering or "Haas effect" delay.

Designed for adding adjustable stereo spread to mono or stereo input signals signals Stereoizer v2.3 gives you the controls you need to take your sounds into new dimensions.

Now with new mono-compatible features and dynamic control for a shifting stereo image, Stereoizer 2 can generate the full range of stereo enhancement, from subtle depth control to full dynamic shifting and phase realignment. Great for percussion parts, lifeless pads, static lead sounds - anything that needs that little bit extra.

More